
Réf. fabricant 21765
Vendu par racedayquads à 44.85 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 71.82 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 44.85 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 11.97 € |
| Total livré | 71.82 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 95 g |
Experience smooth, high-performance flight with the Speedy Bee F405 Wing APP Mini Flight Controller. Its compact size offers convenience and affordability without compromising on features or usability. Expertly designed for seamless operation, this controller is your go-to choice for a superior flying experience. Check out our other wing flight controllers, and our SpeedyBee products! Features With a powerful STM32F405 MCU, built-in barometer, 6 UARTs, I2C, wireless setting through Bluetooth and WiFi, and 12 PWM ports available (9x pin headers + 2x solder pads and 1 LED pad), this is simply a better, more compact, and lighter version of the F405 Wing APP we all love. Perfect for any fixed wing on iNav or Ardupilot. Specifications Product Name: SpeedyBee F405 WING MINI FC board MCU: STM32F405, 168MHz, 1MB Flash IMU(Gyro&Accelerometer): ICM-42688-P Barometer: SPL006-001 OSD Chip: AT7456E Blackbox: MicroSD Card Slot UART: 6 sets (USART1, USART2, USART3, UART4, UART5, UART6 - Dedicated for Wireless board Telemetry connection) I2C: 1x Used for magnetometer, digital airspeed sensor ADC: 4x (VBAT, Current, Analog RSSI, Analog AirSpeed) PWM: 12x (9x pin headers + 2x solder pads + 1x "LED" pad) ELRS/CRSF Receiver: Supported, connected to UART1 SBUS: Built-in inverter for SBUS input (UART2-RX) LED: 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator (Red) Analog RSSI: Supported, Named as "RS" Dual Analog Camera Switching: Default to Camera1 Video Input (C1). Switch between C1 and C2 using ArduPilot Relay or INAV Modes/USER. Both cameras should have the same video format, either PAL or NTSC. Supported FC Firmware: INAV: SpeedyBeeF405WING (default) ArduPilot: SpeedyBeeF405WING Weight: 5.6g SpeedyBee F405 WING MINI PDB board Input voltage range: 7~26V (2~6S LiPo) Battery Voltage Sensor: Connect to FC board VBAT, 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot) Battery Current Sensor: 80A continuous, 150A peak Connect to FC board Current (Scale 195 in INAV, 50 A/V



