racedayquadsMATEK

Matek F405-TE 30x30 Flight Controller w/ Built-in PDB

Name: Matek F405-TE 30x30 Flight Controller w/ Built-in PDB
Brand: MATEK
Price: 95.78 USD

Réf. fabricant 19673

95.78 $≈ 83.01 €

Le prix en résumé

Vendu par racedayquads à 83.01 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 117.61 €. Prix relevés le 2026-09-16.

Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.

Disponibilité inconnue

Voir chez le vendeur ↗

Coût total livré estimé

Détail du coût total livré
Article	83.01 €
Frais de port	15.00 €
TVA (20 %)	19.60 €
Total livré	117.61 €

Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.

Caractéristiques (extraites automatiquement)

Mécanique

Poids

18 g

Description

Another feature rich offering from Matek in the 30x30 class. Loaded with features for digital and analog builds. Matek leads the pack when it comes to quality and performance. This flight controller is great for anyone wanting to run 4 individual ESCs due to its built-in PDB. Check out our 30x30 Flight Controllers as well as the entire Matek selection! Features The MATEKSYS F405-TE Flight Controller features a 30.5 x 30.5mm mounting pattern and weighs 10g. It features a Barometer, Micro SD Slot, 6x UARTS, 11x PWM outputs, 9-36V DC IN (3-8S LiPo), 220A Current Sensor, BEC 12V 2A, 5V 1.5A and Dual analog camera signal inputs. Specifications MCU: 168MHz STM32F405RGT6 IMU: ICM42688-P (SPI) Baro: SPL06-001 (I2C) OSD: AT7456E (SPI) Blackbox: MicroSD slot (SPI) 6x UARTs, 1x Softserial_Tx option(INAV/BF) 11x PWM outputs (8x Dshot compatible with BF/ArduPilot) 1x I2C 4x ADC (VBAT, Current, RSSI, Airspeed) 1x spare PINIO 4x individual ESC power/signal pads 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND Built in inverter on UART2-RX for SBUS input Switchable Dual Camera Input PDB Specifications Input: 9~36V (3~8S LiPo) PDB: 4x 35A (Max.4x 50A) BEC: 5V 1.5A BEC: 12V 2A LDO 3.3V: 200mA Current Senor: 220A, 3.3V ADC (INAV/BF scale 150, ArduPilot 66.7 A/V) Battery Voltage divider 1K:20K (INAV scale 2100, BF scale 210, ArduPilot BATT_VOLT_MULT 21.0) Firmware ArduPilot: MatekF405-TE INAV: MATEKF405TE_SD BetaFlight: MATEKF405TE_SD Dimensions Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm Dimensions: 36 x 46 mm Weight: 10g Includes Matek F405-TE Flight Controller 6x silicon grommets M4 to M3 1x Rubycon ZLH 35V/470uF (Low ESR) Layout Wiring