
Réf. fabricant 21253
Vendu par racedayquads à 47.43 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 74.92 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 47.43 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 12.49 € |
| Total livré | 74.92 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 64 g |
Introducing the SpeedyBee F405 V4 flight controller with dual gyroscope power supply filtering, 4-level battery indicators, support for up to 8 motors, 4x LED strip soldering pads, 3A 5V & 9V BECs, and fixed SD card compatibility issue. Change motor direction wirelessly and quickly get set up with the DJI Air Unit plug-and-play set up. Plus, onboard barometer is included. Interested in the SpeedyBee F405 V4 BLS 3-6S 30x30 Stack/Combo (F405 FC / 8Bit 55A 4in1 ESC)? Interested in the SpeedyBee BLS 8Bit 55A 3-6S 30x30 4in1 ESC? Check out all our 30x30 stacks & combos, and all our Speedy Bee products! Features User manual Wireless FC & ESC full configuration Dual gyroscope power supply filtering Onboard 4-level battery indicators Supports up to 8 Motors 4x LED strips soldering pads 5V & 9V BECs upgraded to 3A output Fixed SD card compatibility issue Change motor direction wirelessly DJI Air Unit plug-and-play Built-in barometer Specifications SpeedyBee F405 V4 30x30 Flight Controller MCU: STM32F405 IMU(Gyro): ICM42688P USB Port Type: Type-C Barometer: Built-in OSD Chip: AT7456E chip BLE Bluetooth: Supported. Used for Flight Controller configuration (MSP should be enabled with Baud rate 115200 on UART4) WIFI: Not supported DJI Air Unit Connection Way: Two ways supported: 6-pin connector or direct soldering. 6-pin DJI Air Unit Plug: Supported. Completely compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1, no wire is needed to be changed.Blackbox MicroSD Card Slot: Betaflight firmware requires the type of the microSD card to be either Standard (SDSC) or High capacity (SDHC) under 32GB, so extended capacity cards (SDXC) are not supported(Many high-speed U3 cards are SDXC). Also the microSD card MUST be formatted with the FAT16 or FAT32 (recommended) format, you could use any SD card less than 32GB, but the Betaflight can only recognize 4GB maximum. Current Sensor Input: Supported. For SpeedyBee BLS 55A ESC, please set scale = 400 and Offset = 0. Power Input: 3S



