racedayquadsAIRBOT· Commande de moteurs
Airbot Fenix G4 4-6S AIO Toothpick/Whoop Flight Controller (w/ 35A 32Bit AM32 4in1 ESC)
Réf. fabricant AIRB-Fenix-G4-AIO
107.09 $≈ 92.81 €
Le prix en résumé
Vendu par racedayquads à 92.81 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 129.37 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock
Coût total livré estimé
| Article | 92.81 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 21.56 € |
| Total livré | 129.37 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Électrique
| Courant | 35 A |
Mécanique
| Poids | 27 g |
Description
The G4 features Betaflight compatibility and is the first of its kind. It contains 4 35A AM32 ESCs, 6S max and the QF32MTF4AK8U7 on the AIO board, creating a more compact design. Two voltage regulators – a 5V and 10V, both rated for 2.5A – are included. The 10V one can power the VTX & DJI O3 Air Unit, while the 5V one can power the LEDs, peripherals, etc. The STM32G47X MCU, ICM-42688p gyro, 16MB Data Flash, DSP310 baro, 16 RGB LEDs, and plug solutions for digital video complete the package. A new feature is the ultra-hydrophobic nano waterproof coating. This coating allows air to pass through while avoiding water, giving extra protection from moisture and other elements. Important note: When trying to get the HD OSD working, it's required that both ground pins out of the DJI port are not soldered to the VTX. Check out our other AIO flight controllers, as well as the rest of our Airbot selection! Features Superhydrophobic Nano Waterproof Coating Onboard 16 RGB LEDs can be programmed ESC has a F4 MCU, runs AM32 firmware, capable of 6S and is rated at 35Amps 10V BEC for DJI O3 Air Unit Specifications MCU: STM32G473, 512KB Flash BEC: 5V 2.5A + 10V 2.5A Blackbox: 128Mbit, 16MB Gyro: ICM-42688 Barometer: DSP310 ESC: F4 MCU, run AM32 firmware, 6S 35Amps OSD: AT7456 4x Uarts 1x 12C Weight:10.4g Mounting pattern：25.5x25.5mm Connector Pinout: SDA, SCL, DN, DP, GND, 5V, L-RX1, L-TX1 is for External USB/GPS Connector TX2, GND, RX1, TX1, GND, 10V is for VTX Connector Wiring Diagram
Produits similaires
racedayquadsEn stock
HappyModel Crazybee F4 Lite 1S Whoop Flight Controller for Mobula6 - Choose Your RX
80.43 €92.81 $
Voir chez le vendeur ↗
racedayquadsEn stock
HappyModel 1S F4 AIO Toothpick/Whoop Flight Controller w/ 5A 8bit 4in1 ESC & 200mW VTX - ELRS 2.4GHz SPI
86.62 €99.95 $
Voir chez le vendeur ↗
racedayquadsEn stock
EMAX Tinyhawk 3 1-2S F4 AIO Flight Controller 5A ESC 25/100/200mW VTX
111.37 €128.51 $
Voir chez le vendeur ↗
racedayquadsEn stock
iFlight Blitz F411 1S 5A Toothpick/Whoop Flight Controller w/ 25-50mW VTX & ELRS RX
86.62 €99.95 $
Voir chez le vendeur ↗
