racedayquadsBetaFPV· Mécanique & transmission
BetaFPV BT3.0 2S Whoop Connector Female/Male Set 10 Pack
Réf. fabricant BETA-01130005_1
10.10 $≈ 8.75 €
Réf. fabricant BETA-01130005_1
Vendu par racedayquads à 8.75 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 28.50 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 8.75 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 4.75 € |
| Total livré | 28.50 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 9 g |
The BT3.0 2S Whoop Connector Male/Female Set 10 Pack is designed for 2S batteries, featuring three gold-plated copper metal pins, allowing for balancing power when charging without an additional balancer connector. This simplification of the 2S battery assembly is lightweight, weighing in at 1.28 grams and occupying less space than regular connectors on the market. This presents an easy solution for 2S quad pilots, freeing up a few grams of quad weight in the process. You will get 5 female and 5 male BT3.0 2S whoop connectors. Check out all our pigtails, connectors and adapters as well as our range of BetaFPV gear! Features An innovative option for 2S whoop drone battery, designed specifically for 2S whoop drones. The BT3.0 connectors offer unparalleled convenience, combining balance charging and discharge power cord functionalities into a single connector, eliminating the need to purchase an expensive balance charger. The BT3.0 connectors are smaller and lighter in weight, with a total weight of only 1.28g for both male and female connectors, compared to regular connectors. The BT3.0 connectors boast a rated discharge current of 12A and an instantaneous current of up to 20A, meeting the discharge requirements of 2S batteries. BT3.0 Connectors The BT3.0 connectors are a 3PIN terminal, two metal pins with a diameter of 1.3mm are used for battery discharge, and two metal pins with a diameter of 1.3mm and a metal pin with a diameter of 1.0mm are combined into a 3PIN connector as a balanced charger for battery charging. The BT3.0 connectors have polarity marks on their welding cup but don't support reverse connections. When welding wires, make sure to pay attention to the positive and negative directions. The connector's design prevents reverse connections, so do not force it in the opposite direction to avoid short circuit risks. When you resolder your board, please pay attention to the connection method. BT3.0 Cable Pigtail is composed of blue wire and white wire. The
