racedayquadsTuneRC

TuneRC Buzzer V2 with Built-in Driver Circuit

Name: TuneRC Buzzer V2 with Built-in Driver Circuit
Brand: TuneRC
Price: 2.96 USD

Réf. fabricant 691023497399

2.96 $≈ 2.57 €

Le prix en résumé

Vendu par racedayquads à 2.57 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 21.08 €. Prix relevés le 2026-09-16.

Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.

Disponibilité inconnue

Voir chez le vendeur ↗

Coût total livré estimé

Détail du coût total livré
Article	2.57 €
Frais de port	15.00 €
TVA (20 %)	3.51 €
Total livré	21.08 €

Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.

Caractéristiques (extraites automatiquement)

Mécanique

Poids

3 g

Description

TuneRC Buzzer is an alarm system to help you locate your lost drone. This buzzer has a driver circuit built in, so you can connect it to any flight controllers as long as there's a free/available port on it. Check out our selection of Buzzers and Alarms, and all TuneRC Products we carry. While you're at it, maybe a GPS module is a good idea? Feature V2 update of this buzzer comes with a Plug-in style configuration for ease of use. How to Connect the Buzzer to Flight Controllers that features “Buzzer+” “Buzzer-” Soldering Pads? You just need to wire the buzzer with the flight controller as per the instruction below. Note: You don’t need to do the mapping in Betaflight. FC “Buzzer+” — Buzzer Red Wire (3V-5V) FC “GND”— Buzzer Black Wire (GND) FC “Buzzer-” — Buzzer Blue Wire (Signal) How to Connect the Buzzer to EZ F411 AIO and Other Flight Controllers that don’t Feature Buzzer Pads？ Step 1. Firstly, please solder the buzzer’s signal wire ( blue wire) to any available/free port on the flight controller. For example, RX1 is mostly the available port on the EZ AIO, so you can connect the FC RX1 with the Buzzer Signal Wire (Blue Wire), FC 5V–Buzzer 3V-5V (Red Wire), FC GND–Buzzer GND (Black Wire) Step 2. In Betaflight, Enter “resource” in the CLI to find out the pin number corresponding to the port. For example, pin number on the EZ corresponding to RX1 is A10. Step 3. Free the available port in the CLI and then set the corresponding pin as beeper, finally enter “save” in the CLI For example, on the EZ AIO board, in the CLI, enter “resource serial_RX 1 NONE” , and then enter “resource beeper 1 A10”. Finally enter “save” and you are done. Specifications Sound Loudness: ≥80db@3V, ≥85db@5V Length: 10.5mm Height: 7.5mm Weight: 1.4g (including wires) Wires Length: 75mm Blue wire: for signal Red wire: for 3V-5V Black wire: for GND Input Voltage 3-5V Includes 1x TuneRC Buzzer V2 with Built-in Driver Circuit