Réf. fabricant 16245
Vendu par racedayquads à 22.68 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 45.22 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 22.68 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 7.54 € |
| Total livré | 45.22 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| KV | 1 600 rpm/V |
| Poids | 23 g |
After testing a range of stator sizes and KVs, I've (umawgawd) come to the conclusion that a 2004 is the smallest size for a 5" lightweight prop and that 300g AUW target... but it has to be lightweight. So to make the motor as light as possible, I worked with the engineers at the factory to test all options. We made the motor mount use only 2 screws to secure, and thus reducing any extra weight from the base. The bell is perforated with slotted cutouts to reduce rotational mass. This adds to the motors ability to rapidly change speed, similar to the effect of lighter props. To further reduce rotational mass, strong, yet lightweight titanium bolts are supplied to secure T-mount props. Because the prop shaft simply doesn't need to be as long as other motors it has been reduced to 1.5mm. And finally... after begging other motor factories... we now have the worlds first (on a 5 inch) "ribbon" motor wires! This will make that ultra clean build without even trying. I didn't want to build just "any" 2004 motor, it needed to be special. Speaking of special, this motor has a 3mm shaft with custom oversized 8x4x3 bearings for maximum smoothness and durability. Browse our micro motors and the rest of our Ummagawd selection! NOTE: The titanium screws use a M1.3 hex driver and is a 12x12 mounting configuration. This motor is designed specifically for the Ummagawd 2fiddy and the Ummagawd Grinderino frame, it may not work with other frames. Specifications Overall Dimension: Φ24.7×13.2mm Installation hole position: 12×12mm，M2 prop mounting shaft diameter: 1.5mm Prop: 3.5inch~5inch Bearing：8x4x3 Shaft Diameter: 3.0mm Lead Wire Size：150mm slots/poles: 12N14P Magnet Wire: 240℃ Enameled Wire Stator Diamter：20mm Stator Height: 4mm Rated Voltage: 4~6S (16.8V~25.2V) Weight: 18.3.g Includes 1x Ummagawd Aerolite 2004 1600KV Motor Screw baggie
