
Réf. fabricant 15182
Vendu par racedayquads à 127.87 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 171.44 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 127.87 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 28.57 € |
| Total livré | 171.44 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 218 g |
Introducing the Moblite7 Ultralight FPV Brushless Whoop! Made in collaboration with FPV pilot "Mr. Shutterbug," this whoop is one of the lightest 75mm drones on the market! And glows in the dark! Check out our other pre-built quads, as well as the rest of our HappyModel selection! Specifications Weight: 36g With battery Propellor Size: 75mm Antenna: Linear Dipole HappyModel DiamondF4 FR FC Input Voltage: 1S LiPo MCU: STM32F411CEU6 Gyro: MPU-6000 OSD: Yes UARTs: 2 Sets ESC Connections: Yes FC Firmware: CrazybeeF4F BEC: 5V 1A Current Sensor: Yes Buzzer: Yes Barometer: No Black Box: No Max. Continuous Current: 5A Max Burst Current: 6A (3sec) ESC Firmware: BLheli_S Factory firmware: O_H_50_REV16_8.HEX Stack Size: 25x25mm Dimensions: 29x29mm Motors Stator Size: 0802 Kv: 19000 Weight: 1.7g Runcam Nano 3 Camera Image Sensor: 1/3" CMOS Horizontal Resolution: 800TVL Lens: 2.1mm(M8) FOV 160° Signal System: NTSC S/N Ratio: > 50dB Electronic Shutter Speed: Auto Auto Gain Control (AGC): Auto Min. Illumination: [email protected] D-WDR: Auto Day/Night: Color Power: DC 3-5.5V Current: 110mA@5V Housing Material: ABS Net Weight: 1.1g Includes 1x 75mm Frame (Mobula7 frame) 1x Option1: DiamondF4 FR built-in SPI Frsky receiver 4x EX0802 KV19000 Unibell brushless motor 1x HQPROP 40MMX2 propeller(4cw+4ccw) 1x Runcam Nano3 1x Built-in 5.8G 40ch 25mw-200mw VTX 2x 1s 650mah Lipo battery 1x Propeller disassemble tool 1x Screwdriver 1x Happymodel Carry case



