racedayquadsDarwinFPV

DarwinFPV BNF Baby Ape Pro V2 Analog 3" Quad - Choose Version

Name: DarwinFPV BNF Baby Ape Pro V2 Analog 3" Quad - Choose Version
Brand: DarwinFPV
Price: 181.46 USD

Réf. fabricant 19736

181.46 $≈ 157.26 €

Le prix en résumé

Vendu par racedayquads à 157.26 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 206.71 €. Prix relevés le 2026-09-16.

Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.

Disponibilité inconnue

Voir chez le vendeur ↗

Coût total livré estimé

Détail du coût total livré
Article	157.26 €
Frais de port	15.00 €
TVA (20 %)	34.45 €
Total livré	206.71 €

Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.

Caractéristiques (extraites automatiquement)

Mécanique

Poids

186 g

Description

The props for this BNF press fit on and do not screw into the motor (much like many other Whoops & Toothpicks) The Darwin Baby Ape has been loved by many pilots as soon as it was published. In order to design a better FPV drone, DarwinFPV upgraded the Baby Ape based on the pilots' feedback and launched the BabyApe Pro V2. Darwin made several upgrades to the frame. First of all, nylon standoffs are upgraded to aluminum alloy standoffs, which strengthens the frame and stables structure. Second, they added the receiver fixing bracket. Third, they upgraded the arms. The arms are upgraded from 4 individual arms (2.5mm thickness) to 2 integrated arms (3.0mm thickness). It is easier to disassemble, sturdy, and durable. Lastly, the V2 version only needs 4 screws to fix, and the arm can be replaced by removing 2 screws without removing the whole drone. Make sure to check out all of our BNF quads as well as the rest of our DarwinFPV selection! Specifications Motors Input Voltage: 2-3S Stator Size: 11x4mm Kv: 4300 AIO MCU: STM32F411 Gyro: MPU6000 BEC: 5V/2A,3.3V Input voltage: 1-3S Lipo Support Receiver: PPM, Ibus, Sbus, Dsmx Black box: NO Barometer: NO Firmware: MATEKF411 Buzzer interface: YES Betaflight OSD: AT7456E Constant current: 15A Peak current: 17A MCU: EFM8BB21F16G(48MHz) Firmware: BLHeli_S Protocol: Dshot600 Mounting: 25.5X25.5 M2 VTX Input Voltage: 7V~24V RF Output Power: 0mW/25mW/100mW/200mW switchable Antenna Connector: U.FL Caddx Ant Camera Model: Caddx Ant Image Sensor: 1/3" CMOS Resolution: 1200TVL Signal System: PAL/NTSC Includes 1x DarwinFPV BNF Baby Ape Pro V2 3" Quad - Plug-N-Play - Choose Version