racedayquadsDarwinFPV· Commande de moteurs
FPV Cycle DarwinFPV F722 2-6S 25.5x25.5 Whoop Stack/Combo (F722 FC/45A 8Bit 4in1 ESC)
Réf. fabricant DARW-STACK009
Réf. fabricant DARW-STACK009
Vendu par racedayquads à 44.24 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 71.09 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 44.24 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 11.85 € |
| Total livré | 71.09 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Courant | 45 A |
| Poids | 45 g |
This is a unique stack for the demands of the industry today. It has a 25.5x25.5 M2 (Whoop) mount pattern because there are now many frames that are designed with that pattern. The problem is that high-powered AIO boards are way overpriced due to the forever chip shortage and still have a high failure rate. Much of the failures are associated with the cramped space constraints of the small board. We split the ESC and FC but called for the ESC to have a nearly empty top side and the FC to have nearly all its components on the bottom and sit inside the footprint of the ESC solder pads. ALL of the FC's solder pads are also on the TOP. When you assemble the stack inside your frame, you will be able to access and solder ALL pads on BOTH boards. Additionally, the FC has a black box chip which is rare on AIO boards. Check out our other AIO Flight Controllers and our Darwin FPV products! Specifications F722 MCU: STM32F722RET6(216MHz) Gyro: MPU6000 Barometer: BMP280(I2C) OSD Chip: Betaflight OSD AT7456E Blackbox: 16MB UARTS: 5 I2C: SDA / SLA pads LED: Yes Beeper: Yes Firmware Target: DARWINF722HD FC Mounting Pattern: 25.5x25.5mm Dimensions: 37x36x10.8mm 4in1 ESC Input Voltage: 3-6S Max. Continuous Current: 50A Max. Burst Current: 60A MCU: EFM8BB21F16G BEC: 5V/2A and 10V/2A Current Sensor: Yes (Scale 125) Mounting Dimensions: 25.5x25.5mm(M2) Dimensions 37x36x10.8mm Includes 1x FPV Cycle Darwin FPV F722 25x25 Flight Controller 1x FPV Cycle Darwin FPV 45A 3-6S 25x25 4in1 ESC 1x XT60-7CM-14AWG Power cables 1x 25V 470uF capacitor 8 x M2*6.5mm Damping rings 4 x M2 nuts Wiring Diagram
