racedayquadsMATEK· Alimentation & batteries
Matek CRSF-PWM-V10 CRSF to PWM Converter w/ Variometer
Réf. fabricant MATE-CRSF-PWM-V10
17.24 $≈ 14.94 €
Le prix en résumé
Vendu par racedayquads à 14.94 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 35.93 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock
Coût total livré estimé
| Article | 14.94 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 5.99 € |
| Total livré | 35.93 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 5 g |
Description
If you want to use your ELRS or CRSF receivers with a PWM system along with barometer and GPS telemetry then Matek has the solution that you've been waiting for. This board allows you to attach your CRSF receiver and use PWM pins to connect to your wing or plane. This is perfect for those who want the stability of a plane or wing, but also want the dependable long range of the crossfire. Check out the rest of our RC receivers, ELRS gear and all of our Matek selection! Specifications Compatible with CRSF protocol receiver only Support any CRSF protocol receivers(including 433MHz, 868MHz, 915MHz, 2.4GHz) 10x PWM outputs PWM frequency configurable (50Hz default, 100,160,330, 400Hz) 2x UARTs (for Receiver and GPS) Telemetry ID: RxBt, Curr, Capa, Bat%, GPS, GSpd, Hdg, Alt, Sats, Vspd, Baro Alt (Start with EdgeTX 2.7.1/OpenTX 2.3.15 and ExpressLRS 2.5) 36V Max. battery voltage sense (1K:10K voltage divider built-in) Compatible with external Current sensor (0~3.3V) Vbat and Current sensor scale configurable Failsafe value configurable Firmware upgradeable 5V LDO (300mA) integrated for GPS and external Receiver. Rated voltage: 4~9V @BEC pad, 0~36V @Vbat, 0~3.3V @Curr No regulator built-in for servos, Servos must be powered via BEC pad by external 5-9V source. 38mm x 16mm, 1.8g Packing: 1x CRSF-PWM-V10, Dupont 2.54 pins Includes 1x Matek CRSF-PWM-V10 CRSF to PWM converter Wiring Diagram
