
Réf. fabricant 17698
Vendu par racedayquads à 74.24 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 107.09 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 74.24 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 17.85 € |
| Total livré | 107.09 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 14 g |
Another solid choice in the Matek F405-miniTE 20x20 Flight Controller by a company that leads the pack when it comes to quality and performance. Check out all our 20x20 FCs as well as the entire Matek selection! Features F405 has 1MB flash which can run with ArduPilot. even with INAV firmware. Redesigned target MATEKF405TE support 8x bi-directional DSHOT. Support DJI air unit PnP, and a 10V BEC for DJI OSD or analog VTX Compared with F722-miniSE 8motors or 6motor+2servos, F405-miniTE supports 8motors+3servos in INAV/BF multirotor mixer Convertible 20mm to 30.5mm mounting Specifications Input: 6~30V (2~6S LiPo) MCU: STM32F405RGT6 IMU: ICM42688-P OSD: AT7456E Baro: Goertek SPL06-001 (I2C) Blackbox: 16M-byte Flash memory UARTs: 6 PWM outputs: 12 (8 Dshot) I2C: 1 ADC: 4 (VBAT, Current, RSSI, Airspeed) Current Sensor: No PINIO: 2 BEC: 5V 1.7A & 10V 1.4A Mounting Pattern: 20x20 M2/M3, 30X30 M3 Weight: 5g Includes 1x Matek F405-miniTE 20x20 Flight Controller 1x 20mm to 30mm conversion plate(blue PCB) 6x Silicon grommets M4 to M3 6x Brass grommets M3 to M2 1x SH1.0_8pin cable 5cm (including 2x 8pin connectors) for 4in1 ESC 1x SH1.0_6pin to GH1.25_8pin cable 8cm for DJI Air Unit



