racedayquadsHOBBYPORTER
Radiomaster R81 V2 8CH Frsky D8/D16/SFHSS Compatible Nano Rx w/Sbus
Réf. fabricant 15739
14.27 $≈ 12.37 €
Le prix en résumé
Vendu par racedayquads à 12.37 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 32.84 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Disponibilité inconnue
Coût total livré estimé
| Article | 12.37 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 5.47 € |
| Total livré | 32.84 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 9 g |
Description
Radiomaster R81 V2 is a FrSky D8/D16 compatible receiver with dual antennas, SBUS out, and a tiny size. Very similar to the FrSky XM+. Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories! Specifications Channels: 8CH Frequency range: 2400-2483.5Mhz Power input range: 4.5-6V Signal format: FrSky D8/D16/SFHSS Compatible Output format: SBUS (Inverted) Support return: support return RSSI Control distance: more than 1km Antenna length: Approximaltly 6cm Size: 17x11 mm Weight: 2g Manual R81 Manual Includes 1x RadioMaster R81 V2 SBUS D8 2.4GHz Nano Receiver Bind method: 1. Press and hold the BIND button on the receiver then connect power. After approximately 3 seconds, the receiver LED will be RED, the receiver is now in bind mode 2. Select the D8 protocol for the multi-protocol menu of your remote control, and press the [BIND] option, the red light of the receiver will flash indicating successful bind 3. Exit bind mode on your remote control and disconnect power to the receiver then power the receiver once more. The LED will now be solid RED indicated the bind is now done. If not please repeat step 1 and 2 Fail-safe Protection: 1. Press the BIND button once within 10 seconds of the receiver being powered on, and the receiver will save all the current channel values of the remote control as the fail-safe value 2. 10 seconds after the receiver is powered on, the BIND button function will be disabled to prevent accidental changes to to the fail-safe settings while preparing the model for flight RSSI output: This receiver has a total of 9 channels. 8 channels + an RSSI output channel. Channels 1-8 are controlled by the remote controller, the 9th channel is the signal strength RSSI value output by the receiver itself, which can be read by the flight controller and sent to the OSD device Show signal strength.
Produits similaires
racedayquadsEn stock
HappyModel FLI14+ 2.4GHz Mini Receiver - FlySky Compatible
16.49 €19.03 $
Voir chez le vendeur ↗
racedayquadsEn stock
RadioMaster R88 V2 2.4GHz Frsky D8/D16/SFHSS Protocol PWM Receiver
25.77 €29.74 $
Voir chez le vendeur ↗
