racedayquadsMATEK

Matek H743 Slim V3 30x30 Flight Controller

Name: Matek H743 Slim V3 30x30 Flight Controller
Brand: MATEK
Price: 138.62 USD

Réf. fabricant 19032

138.62 $≈ 120.13 €

Le prix en résumé

Vendu par racedayquads à 120.13 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 162.16 €. Prix relevés le 2026-09-16.

Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.

Disponibilité inconnue

Voir chez le vendeur ↗

Coût total livré estimé

Détail du coût total livré
Article	120.13 €
Frais de port	15.00 €
TVA (20 %)	27.03 €
Total livré	162.16 €

Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.

Caractéristiques (extraites automatiquement)

Mécanique

Poids

14 g

Description

Packed with features, the H743-Slim from Matek is ready to go. Compatible with INAV, Betaflight, and ArduPilot. Check out our 30x30 Flight Controllers as well as the entire Matek selection! Specifications FC Specifications Brand name: Matek Systems Item name: H743-SLIM Flight Controller MCU: STM32H743VIH6, 480MHz , 1MB RAM, 2MB Flash IMU: ICM42688P & ICM42605 Baro: Infineon DPS310 (I2C2) OSD: AT7456E (SPI2) Blackbox: MicroSD card socket (SDIO) 7x Uarts (1,2,3,4,6,7,8) with built-in inversion. 13x PWM outputs(including “LED” pad) 2x I2C 1x CAN 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2) 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) 1x SPI3 break0ut USB Type-C(USB2.0) 1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4) 1x JST-GH1.25_4pin connector (5V/CAN-H/CAN-L/G) Dual Camera Inputs switch 5V/Vbat filtered power ON/OFF switch DJI FPV OSD is supported by any spare UART Power Vbat Input: 6~36V (2~8S LiPo) BEC: 5V 2A cont. (Max.3A) LDO 3.3V: Max.200mA No Current Sensor built-in ADC Vbat2 pad supports Max. 69V (voltage divider: 1K:20K) Static power: 200mA@5V with Betaflight, 150mA@5V with ArduPilot FC Firmware ArduPilot(ChiBiOS): MATEKH743 BetaFlight: MATEKH743 INAV: MATEKH743 (To be supported soon) Physical Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm Dimensions: 36 x 36 x 5 mm Weight: 7g Includes 1x Matek H743 Slim 30x30 Flight Controller Wiring Diagram QA: ArduPilot Relay(PINIO Camera-1 and Vsw On by default Make sure 2 cameras are set with identical video format, both PAL or both NTSC. # GPIOs PD10 PINIO1 OUTPUT GPIO(81) //Vsw pad power switch PD11 PINIO2 OUTPUT GPIO(82) //Camera switch # RCx_OPTION: RC input option 28 Relay On/Off 34 Relay2 On/Off 35 Relay3 On/Off 36 Relay4 On/Off e.g. RELAY_PIN 81 //Vsw GPIO RC7_OPTION 28 //Relay On/Off, Use CH7 of Transmitter to switch Vsw RELAY_PIN2 82 //Camera switch GPIO RC8_OPTION 34 //Relay2 On/Off, Use CH8 of Transmitter to switch camera or RELAY_PIN3 81 //Vsw GPIO RC9_OPTION 35 //Relay3