

Réf. fabricant 14040125
Vendu par MÄDLER à 70.20 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 102.24 €. Prix relevés le 2026-10-04.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 70.20 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 17.04 € |
| Total livré | 102.24 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 130 g |
| Number of strands | 2 |
| Din iso no | 08 B-2 |
| Material | Plastic (PE-UHMW) |
| Pitch | 1/2 x 5/16″ |
| Surface | Blank |
| Tensioning force | 58-32 N |
Material: Housing from thermoplast. Chain rider from ultra-high-molecular polyethylene PE-UHMW. Screws and spring from stainless steel. These small, ready-to install tensioners enable noise reduction and wear reduction at chain drives. • With spiral, linear spring. On choice two tensioning forces. • With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N). • Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm. • Interchangeable with similar parts of other suppliers. Temperature range: -20°C to +60°C (short time up to +80°C).



