

Réf. fabricant 14040628
Vendu par MÄDLER à 320.66 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 402.79 €. Prix relevés le 2026-10-04.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 320.66 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 67.13 € |
| Total livré | 402.79 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 890 g |
| Height | 133 mm |
| Number of strands | 2 |
| Width of sliding surface | 45 mm |
| Din iso no | 16 B-2 |
| Material | Plastic (PE-UHMW) / Steel |
| Pitch | 1″ x 17,02 mm |
| Surface | Zinc-plated. varnished |
| Tensioning force | 396-180 N |
Material: Housing from steel, zinc-plated, black lackered. Chain rider from ultra-high-molecular polyethylene PE-UHMW. These ready-to-install tensioners enable noise reduction and wear reduction at chain drives. With three springs. On choice: Two tensioning force versions. At both versions, three different forces can get activated. With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low. Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm. Interchangeable with similar parts of other suppliers. Temperature range: -20°C to +60°C (short time up to +80°C).
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.





