
Réf. fabricant 5485
Vendu par Pololu à 19.88 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 53.86 €. Prix relevés le 2026-08-07.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 19.88 € |
|---|---|
| Frais de port | 25.00 € |
| TVA (20 %) | 8.98 € |
| Total livré | 53.86 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Qté | Prix unitaire | Économie |
|---|---|---|
| ≥ 1 | 22.95 $ | |
| ≥ 5 | 21.11 $ | −8 % |
| ≥ 25 | 19.42 $ | −15 % |
| ≥ 100 | 17.87 $ | −22 % |
| Tension max. | 5.5 V |
| Tension min. | 3 V |
| Poids | 0.5 g |
| Maximum range | 130 cm |
| Supply current | 30 mA |
| Update rate | 100 Hz |
| Connector | side-entry, 3-pin JST SH-type |
| Other pcb markings | 0J15469, 0J15601, or 0J15851 |
| Output type | digital pulse width |
| Pcb dev codes | irs17b |
| Resolution | 1 mm |
| Size | 0.9″ × 0.35″ × 0.22″ |
This small lidar-based distance sensor reports the distance of objects up to about 130 cm (50″) away with a pulsed signal similar to a hobby servo control signal. A digital microcontroller pin can be used to time the length of each high pulse, which encodes the measured distance. It works over an input voltage range of 3.0 V to 5.5 V and features a side-entry 3-pin JST SH-style connector that is compatible with our 3-pin JST SH-style cables. Note: The maximum range of 130 cm is only achievable for high-reflectance objects in good ambient conditions. Lower-reflectivity targets or poor ambient conditions will reduce the maximum range.
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.



