Bevel gear made of polyacetal resin die-cast module 2 40 teeth i=4:1 bore 18mm

MÄDLERMÄDLER· Mécanique & transmission

Bevel gear made of polyacetal resin die-cast module 2 40 teeth i=4:1 bore 18mm

Name: Bevel gear made of polyacetal resin die-cast module 2 40 teeth i=4:1 bore 18mm
Brand: MÄDLER
Price: 14.44 USD
Availability: BackOrder

Réf. fabricant 35608900

14.44 $≈ 12.51 €

Le prix en résumé

Vendu par MÄDLER à 12.51 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 33.01 €. Prix relevés le 2026-08-07.

Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.

Sur commandedélai 14 j

Voir chez le vendeur ↗

Coût total livré estimé

Détail du coût total livré
Article	12.51 €
Frais de port	15.00 €
TVA (20 %)	5.50 €
Total livré	33.01 €

Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.

Documentation technique

Caractéristiques (extraites automatiquement)

Mécanique

Poids

62 g

Autres caractéristiques

Max torque	160 Ncm
Module	2
No of teeth	40
Optional counter wheel part no	35 608 800
Outer diameter	81.5 mm
Material	Plastic die-cast (Polyacetal, up to 80°C)
Ratio	4:1 (40/10)
Surface	Blank

Description

Material: Polyacetal resin, die-cast. Shaft angle 90°. Bores from Module 1,5 machined. The bevel gears only run as a pair at the stated ratio. Thermoplastic materials have a far larger thermal expansion than metals. This fact must be considered with view to the crown and flank clearance when mounting the gear. Crown clearance Sk ~ 0,25 . m, flank clearance Sc ~ 0,05 . m. Thermal expansion coefficient = 1,1 . 10-4 1/°C. The bevel gears are also available with smaller bores, or with feather key groove. Additional charge worked out on time basis. Note Regarding the Gears Made of Polyacetal Resin: Inside these die-cast parts are some cavities caused by production. These parts should therefore not be drilled too deep. With larger bores or when grooving the cavities might become visible. This often does not affect the functionality. Note for ordering: These gears are sold singulary, not by pair. For a pair of bevel gears, you have to order two matching gears of the same module and ratio. At ratio 1:1, you need two pieces of the same number of teeth. At ratio uneven 1:1, you need two pieces with a different number of teeth of the same ratio.