Shaft-mounted flat gearbox BOC1 size 3 version A i=15.10:1 (For operating instructions please visit the download area of our website www.maedler.de)

MÄDLERMÄDLER· Moteurs & actionneurs

Shaft-mounted flat gearbox BOC1 size 3 version A i=15.10:1 (For operating instructions please visit the download area of our website www.maedler.de)

Name: Shaft-mounted flat gearbox BOC1 size 3 version A i=15.10:1 (For operating instructions please visit the download area of our website www.maedler.de)
Brand: MÄDLER
Price: 2042.65 USD
Availability: BackOrder

Réf. fabricant 40034017

2042.65 $≈ 1769.75 €

Le prix en résumé

Vendu par MÄDLER à 1769.75 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 2141.70 €. Prix relevés le 2026-08-07.

Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.

Sur commandedélai 56 j

Voir chez le vendeur ↗

Coût total livré estimé

Détail du coût total livré
Article	1769.75 €
Frais de port	15.00 €
TVA (20 %)	356.95 €
Total livré	2141.70 €

Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.

Documentation technique

Caractéristiques (extraites automatiquement)

Mécanique

Poids

36 kg

Autres caractéristiques

N2 at n1 1400min min.	94.1
P at n1 1400min kw	8.1
Ratio i	15.1
T2 at fb 1 nm	783
Version	A

Description

General data: Compact design for confined spaces. Ratios of i = approx. 4.13:1 to 51.73:1. Larger ratios on request. Input power of 2.7 to 19.3 kW Version A: With hollow shaft on output side = Standard. Version B: With torque arm. Version C: With flange on the output side. Version D: With foot mounting brackets, see drawing on PDF-catalog pages. Version E: With foot mounting brackets, see drawing on PDF-catalog pages. Version F: With single-sided solid output shaft. (Version B – F on request). Housing: Rigid, ribbed grey cast iron housing, thus quiet, lowvibration running characteristics. Fully sealed against oil leaks and protected against water jets. Gears: The helical gear wheels are made from heat-treated and case-hardened steel. The gearing is hardened and precisely machined. Bearing: Generously-dimensioned roller bearings. Input shaft/end shield: The shaft tolerances, and the flange adapters which can be delivered on request, are suited for IEC standard motors. Lubrication: The gear boxes are delivered ready for work, filled with the correct level of oil or grease (ambient temperature – 10°C to 50°C), which offers sufficient lubrication for about 10.000 operation hours, or for an operation period of max. 2 years. Before start up, the plastic plug must be taken out of the venting screw.