MÄDLERMÄDLER· Mécanique & transmission
Planetary gearbox MPL size 50 ratio i=7 1-stage
Réf. fabricant 40525007
Réf. fabricant 40525007
Vendu par MÄDLER à 313.02 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 393.62 €. Prix relevés le 2026-08-05.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 313.02 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 65.60 € |
| Total livré | 393.62 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 600 g |
| Max acceleration torque at the output | 14 Nm |
| Max output torque emergency off | 21 Nm |
| Nominal input torque | 1.03 Nm |
| Number of gear stages | 1 |
| Permissible output torque | 7 Nm |
| Size | 50 |
| Torsional stiffness | 0.9 Nm/arcmin |
| Backlash | <= 10 arcmin |
| Level of efficiency | > 97 % |
| Mass moment of inertia | 0.060 kgcm2 |
| Max input speed | 8000 min-1 |
| Nominal input speed | 4000 min-1 |
| Ratio | 7 : 1 |
The low-backlash planetary gearboxe are available in 11 ratios. They are characterized by their robust and short design. Due to the special design, the gearboxes are suitable for high torsional stiffness and also for applications with high radial and axial forces. The gearboxes are available in 3 housing sizes 50 mm, 70 mm and 90 mm. • Lubrication: Fluid grease, lubricated for life. • Any mounting position possible. • Temperature range: -25 °C to +90 °C. The selection of the suitable motor depends on the application. The use of a stepper motor or servo motor is common. In principle, however, all motor types can be used. Motor adaption and reducing bush have to be ordered separately. 1) Lifetime 20,000 h at output speed 100 min -1. 2) max. 1,000 Cycles per hr. Ta max.– Share <5% of total running time. 3) max. 1,000 cycles during the gearbox service life. 4) elated to the drive shaft.