MÄDLER
Réf. fabricant 41200705
Vendu par MÄDLER à 1137.78 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 1383.34 €. Prix relevés le 2026-08-07.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 1137.78 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 230.56 € |
| Total livré | 1383.34 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 12 kg |
| Input shaft diameter | 15 mm |
| Max input power at 1 000 min 1 | 1.76 kW |
| Max input power at 1 500 min 1 | 2.38 kW |
| Max input power at 250 min 1 | 0.51 kW |
| Max input power at 3 000 min 1 | 3.97 kW |
| Max input power at 50 min 1 | 0.1 kW |
| Max input power at 500 min 1 | 0.98 kW |
| Max input power at 750 min 1 | 1.42 kW |
| Max torque at 10 min 1 | 95 Nm |
| Max torque at 100 min 1 | 89 Nm |
| Max torque at 150 min 1 | 86 Nm |
| Max torque at 200 min 1 | 80 Nm |
General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down.
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.
| Max torque at 300 min 1 | 72 Nm |
| Max torque at 50 min 1 | 92 Nm |
| Max torque at 600 min 1 | 60 Nm |
| Output shaft diameter | 25 mm |
| Rim length | 120 mm |
| Size | 2 |
| Version | 10 |