MÄDLER
Réf. fabricant 41201001
Vendu par MÄDLER à 1886.04 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 2281.25 €. Prix relevés le 2026-08-05.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 1886.04 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 380.21 € |
| Total livré | 2281.25 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 24 kg |
| Input shaft diameter | 35 mm |
| Max input power at 1 000 min 1 | 20.59 kW |
| Max input power at 1 500 min 1 | 27.78 kW |
| Max input power at 250 min 1 | 6.07 kW |
| Max input power at 3 000 min 1 | 40.78 kW |
| Max input power at 50 min 1 | 1.29 kW |
| Max input power at 500 min 1 | 11.56 kW |
| Max input power at 750 min 1 | 16.26 kW |
| Max torque at 1 000 min 1 | 252 Nm |
| Max torque at 167 min 1 | 330 Nm |
| Max torque at 2 000 min 1 | 185 Nm |
| Max torque at 300 min 1 | 315 Nm |
General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down.
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.
| Max torque at 33 min 1 | 355 Nm |
| Max torque at 500 min 1 | 295 Nm |
| Max torque at 667 min 1 | 280 Nm |
| Output shaft diameter | 35 mm |
| Rim length | 160 mm |
| Size | 25 |
| Version | 10 |