MÄDLERMÄDLER
Réf. fabricant 41203806
Vendu par MÄDLER à 1402.28 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 1700.74 €. Prix relevés le 2026-08-05.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 1402.28 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 283.46 € |
| Total livré | 1700.74 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 12 kg |
| Input shaft diameter | 15 mm |
| Max input power at 1 000 min 1 | 1.22 kW |
| Max input power at 1 500 min 1 | 1.75 kW |
| Max input power at 250 min 1 | 0.33 kW |
| Max input power at 3 000 min 1 | 2.95 kW |
| Max input power at 50 min 1 | 0.06 kW |
| Max input power at 500 min 1 | 0.63 kW |
| Max input power at 750 min 1 | 0.94 kW |
| Max torque at 125 min 1 | 68 Nm |
| Max torque at 167 min 1 | 66 Nm |
| Max torque at 250 min 1 | 64 Nm |
| Max torque at 42 min 1 | 69 Nm |
General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model L: Straight-through shaft, slowly turning.
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.
| Max torque at 500 min 1 | 54 Nm |
| Max torque at 8 min 1 | 71 Nm |
| Max torque at 83 min 1 | 68 Nm |
| Output shaft diameter | 25 mm |
| Rim length | 120 mm |
| Size | 2 |
| Version | 60 |