MÄDLER
Réf. fabricant 42100309
Vendu par MÄDLER à 834.26 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 1019.11 €. Prix relevés le 2026-08-07.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 834.26 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 169.85 € |
| Total livré | 1019.11 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Level of efficiency at 1 500 min 1 | 0.66 eta |
| Level of efficiency at 10 min 1 | 0.58 eta |
| Max input power at 1 500 min 1 | 0.21 kW |
| Max input power at 10 min 1 | 0.003 kW |
| Max torque at 1 500 min 1 | 46 Nm |
| Max torque at 10 min 1 | 74 Nm |
| Ratio | 52 : 1 |
| Ratio actual | 52/1 |
General data: Universal heavy-duty gearboxes. Housing: High-quality grey cast iron, all sides machined and with mounting holes on 4 sides. Gearing: 13 ratios from 5 to 82 : 1; worm shaft hardened and ground. Worm gear made from special centrifugally cast bronze. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Proper running in is a crucial factor influencing the lifetime of the gearbox. The starting efficiency factor is, as the operating efficiency factor), depending on the lead angle. Self-locking: Self-locking only occurs in worm gear units, when the unit cannot be driven from the output side. Worms with 4 and 6 threads sometimes permit transmission ratios for gearing up (i = 5 : 1 to 13.3 : 1). If a gearbox must be implicitly self-locking, or must implicitly not be self-locking, we urge you to contact us. Only the ratios 40:1 product No. 42100314 and 72:1 product No. 42100313 are generally self-locking and optimized for manual operation. Bearing system: All gearbox shafts with generously dimensioned roller bearings. Lubrication: The gearboxes are lubricated for life using synthetic oil. Under normal operating conditions, no maintenance is required. The housing should be checked for leakages at an interval of approx. 2 years. Ventilation: Size (centre distance) 40 is supplied without ventilation. With the other gearboxes, the sealing plug has to be exchanged with the separately packed venting filter.