MÄDLERMÄDLER· Moteurs & actionneurs
Servo worm gear unit ZM/S size 50 i=16:1 output shaft with shrink disk side 6
Réf. fabricant 42105109
1368.71 $≈ 1185.85 €
Le prix en résumé
Vendu par MÄDLER à 1185.85 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 1441.02 €. Prix relevés le 2026-08-07.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Sur commandedélai 56 j
Coût total livré estimé
| Article | 1185.85 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 240.17 € |
| Total livré | 1441.02 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Documentation technique
Caractéristiques (extraites automatiquement)
Autres caractéristiques
| Backlash constant torque | 125 Nm |
| Level of efficiency | 88 % |
| Max output torque | 399 Nm |
| Maximum acceleration torque output | 171 Nm |
| Permittable input torque | 8.6 Nm |
| Permittable output torque permanent t2 zul 1 3 | 122 Nm |
| Size | 50 |
| Torsional stiffness | 9 Nm/arcmin |
| Input speed max. | 7000 min-1 |
| Ratio | 16.0 : 1 |
Description
These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application. General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C. Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides. Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Self-locking: The servo worm gear unit isn‘t self-locking. Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force. Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required. Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated. Delivery: 2 products have to be ordered: – the servo worm gear unit with shrink disc on the output side 5 or 6. – the motor adaptation with coupling, flange and fixing screws. 1) permittable output torque T2 zul. under consideration of thermal limits. 2) maximum output torque T2 max. without co
Alternatives moins chères
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.
MÄDLERSur commande
Servo worm gear unit ZM/S size 40 i=39:1 output shaft with shrink disk side 6
1035.20 €1194.83 $
Voir chez le vendeur ↗MÄDLERSur commande
Servo worm gear unit ZM/S size 40 i=27:1 output shaft with shrink disk side 6
1035.20 €1194.83 $
Voir chez le vendeur ↗Produits similaires
MÄDLERSur commande
Servo worm gear unit ZM/S size 50 i=16:1 output shaft with shrink disk side 5
1185.85 €1368.71 $
Voir chez le vendeur ↗MÄDLERSur commande
Servo worm gear unit ZM/S size 50 i=6,4:1 output shaft with shrink disk side 6
1185.85 €1368.71 $
Voir chez le vendeur ↗MÄDLERSur commande
Servo worm gear unit ZM/S size 50 i=10:1 output shaft with shrink disk side 6
1185.85 €1368.71 $
Voir chez le vendeur ↗MÄDLERSur commande
Servo worm gear unit ZM/S size 40 i=16:1 output shaft with shrink disk side 6
1035.20 €1194.83 $
Voir chez le vendeur ↗