Servo worm gear unit ZM/S size 50 i=39:1 output shaft with shrink disk side 5

MÄDLERMÄDLER· Moteurs & actionneurs

Servo worm gear unit ZM/S size 50 i=39:1 output shaft with shrink disk side 5

Name: Servo worm gear unit ZM/S size 50 i=39:1 output shaft with shrink disk side 5
Brand: MÄDLER
Price: 1368.71 USD
Availability: BackOrder

Réf. fabricant 42105116

1368.71 $≈ 1186.57 €

Le prix en résumé

Vendu par MÄDLER à 1186.57 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 1441.88 €. Prix relevés le 2026-08-08.

Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.

Sur commandedélai 56 j

Voir chez le vendeur ↗

Coût total livré estimé

Détail du coût total livré
Article	1186.57 €
Frais de port	15.00 €
TVA (20 %)	240.31 €
Total livré	1441.88 €

Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.

Documentation technique

Caractéristiques (extraites automatiquement)

Autres caractéristiques

Backlash constant torque	115 Nm
Level of efficiency	76 %
Max output torque	315 Nm
Maximum acceleration torque output	158 Nm
Permittable input torque	4.3 Nm
Permittable output torque permanent t2 zul 1 3	129 Nm
Size	50
Torsional stiffness	9 Nm/arcmin
Input speed max.	7000 min-1
Ratio	39.0 : 1

Description

These servo gearboxes are characterised by high torsional rigidity and very low torsional backlash. This enables high acceleration and precise positioning accuracy in your application. General data: Universal heavy-duty worm gear boxes. 4 sizes, centre distance 40, 50, 63 and 80 mm. On request with keyway in the hollow shaft and centre distance 100mm available. Permissible ambient temperature -20°C to +40°C. Housing: High quality aluminium die-casting, all sides machined and with mounting holes on 5 sides. Gearing: 6 ratios from 4,0 to 39,0 : 1. Worm shaft hardened and ground, worm wheel made of high-performance bronze, Gear backlash <6 arcmin. On request, at extra cost and depending on size, the backlash can get decreased by the factory <2 arcmin. Efficiency factor: The efficiency factors stated in the selection tables are guideline values for properly run-in and lubricated gearboxes at operating temperature with nominal load and driving worm shaft. Self-locking: The servo worm gear unit isn‘t self-locking. Bearing Systems: Generously dimensioned ball-bearings for continuous modes. Input side with fixed and loose bearing, output side bearing in eccentric cover. On request available with tapered roller bearing for dynamic operation and high external force. Lubrication: On delivery with food-grad lubricant NSF-H1 filled (FDA approved). On request, the gearbox can be filled with other lubricants at the factory. Under normal operating conditions, no maintenance is required. Ventilation: No ventilation screw necessary. The venting is effected by hermetic pressure compensation (Membran), The membran is independent from the mounting position and in the housing integrated. Delivery: 2 products have to be ordered: – the servo worm gear unit with shrink disc on the output side 5 or 6. – the motor adaptation with coupling, flange and fixing screws. 1) permittable output torque T2 zul. under consideration of thermal limits. 2) maximum output torque T2 max.without con