

Réf. fabricant 43039824
Vendu par MÄDLER à 195.65 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 252.78 €. Prix relevés le 2026-08-07.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 195.65 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 42.13 € |
| Total livré | 252.78 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Tension | 24 V |
| Couple | 3.059 kg·cm |
| Poids | 620 g |
| Max current | 5 A |
| Max torque | 1.1 Nm |
| Nominal torque | 0.3 Nm |
| Nominal voltage | 24 V |
| Number of gear stages | 1 |
| Idle speed | 980 min-1 |
| Nominal speed | 811 min-1 |
| Ratio | 3.6:1 |
Housing: Motor: Steel, zinc-plated. Gearbox: made of plastic. Can be mounted in any position. Teeth: Gear set made from plastic. Bearing: Output side, plain bearing, motor side A, ball bearing, motor side B, plain bearing. Lubrication: Maintenance free grease lubrication. Motor: Brushed DC motor 24 V, interference capacitive. Change the direction of rotation by switching the polarity. Protection class acc. to EN 60529: IP 40. Operating mode as per VDE 0530: S1 at nominal torque (continous torque),S2 at higher load. Permissible radial shaft load FR: Products with 1 gear stage 40 N; with 2 gear stages 65 N; with 3 gear stages 90 N. Permissible axial shaft load FA: 40 N. Note: All values are averages, measured with the motor cold. Deviations of 10% are possible. To prevent the gearbox from being overloaded, the stated limit loads must not be exceeded. *Recommended mounts: EJOT DELTA PT WN 5452 40 x … ; Keep screw depth 10mm. Fastening torque max. 1,6 +0,2 Nm. Other types (other speeds, optional incremental encoder, 12V) available on request.
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.





