MÄDLERMÄDLER· Mécanique & transmission
Worm gear screw jack NPT size 2 type C basic gearbox without spindle for spindle Tr.20×4 (For operating instructions please visit the download area of our website www.maedler.de)
Réf. fabricant 47502200
1169.48 $≈ 1013.24 €
Le prix en résumé
Vendu par MÄDLER à 1013.24 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 1233.89 €. Prix relevés le 2026-08-07.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Sur commandedélai 14 j
Coût total livré estimé
| Article | 1013.24 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 205.65 € |
| Total livré | 1233.89 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Documentation technique
Caractéristiques (extraites automatiquement)
Autres caractéristiques
| Height of housing | 100 mm |
| Housing width | 85 mm |
| Length of housing | 75 mm |
| Level of efficiency | 30 % |
| Max stroke force | 10 000 N |
| Required torque at max load | 7 Nm |
| Size | 2 |
| Stroke | 1 mm |
| Weight of gear box | 2.1 kg |
| Spindle | Tr. 20 x 4 single-thread RH |
Description
Version C: The spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit. Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Gearing: Worm made from ETG100, Gear made from Gbz12. Self-locking to a certain extend. Vibration, an increase in the spindle pitch or the use of rolling screw elements release the self-locking. In this case, e.g., a brake motor should be included in the system. For lower stroke speeds, worm gear sets with higher transmission ratios can be supplied on request. Spindle: Material C15, from size 4 C45. On request also available as left-hand, stainless steel or ball screw version. Version C: In this version the spindle is fixed to the worm gear. The axial movement is taken over by the threaded nut running outside the gear unit (also 1 mm stroke per full rotation of the worm shaft). You will find further dimensions on our catalogue page. 1) Stroke pro full rotation of the input shaft. 2) Required torque at max. load (only under optimum conditions, with run-in spindle)
Alternatives moins chères
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.
MÄDLEREn stock
Worm gear screw jack NPT size 1 type B basic gearbox without spindle for spindle Tr.18×4 (For operating instructions please visit the download area of our website www.maedler.de)
773.26 €892.50 $
Voir chez le vendeur ↗
MÄDLERSur commande
Travelling nut for worm gear screw jack NPT version C size 0 with trapezoidal thread Tr. 16×4
110.32 €127.33 $
Voir chez le vendeur ↗Produits similaires
MÄDLERSur commande
Worm gear screw jack NPT size 0 type C basic gearbox without spindle for spindle Tr16x4. (For operating instructions please visit the download area of our website www.maedler.de)
778.50 €898.54 $
Voir chez le vendeur ↗MÄDLERSur commande
Worm gear screw jack NPT size 1 type C basic gearbox without spindle for spindle Tr.18×4 (For operating instructions please visit the download area of our website www.maedler.de)
830.79 €958.90 $
Voir chez le vendeur ↗MÄDLERSur commande
Worm gear screw jack NPT size 4 type C basic gearbox without spindle for spindle Tr.40×7 (For operating instructions please visit the download area of our website www.maedler.de)
1716.18 €1980.82 $
Voir chez le vendeur ↗MÄDLERSur commande
Worm gear screw jack NPT size 3 type C basic gearbox without spindle for spindle Tr.30×6 (For operating instructions please visit the download area of our website www.maedler.de)
1124.83 €1298.28 $
Voir chez le vendeur ↗