

Réf. fabricant 60012000
Vendu par MÄDLER à 51.85 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 80.22 €. Prix relevés le 2026-08-07.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 51.85 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 13.37 € |
| Total livré | 80.22 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 518 g |
| Bore diameter | 20 mm |
| Max misalignment angle | 0 ° |
| Max misalignment axial | 0 mm |
| Max misalignment radial | 0 mm |
| Max speed | 4 U/min |
| Max torque | 70 Nm |
| Outer diameter | 42 mm |
| Temperature max. | 150 °C |
| Temperature min. | -40 °C |
| Tightening torque fastening screws | 7.2 Nm |
| Total length | 65 mm |
| Bolts din 916 | M 6 |
| Coupling type | Rigid one-piece stlye |
Material: Steel C45, black oxide finish. These couplings do not allow any shaft displacement in axial or radial direction. They should therefore only be used with perfectly alligned shafts. Bore tolerance: +0,05 mm. The torques in the table are maximum values for couplings with keyway. The calculations based on feather-key connection. For couplings without keyway: The transmittable torque is lower and depends on how far the set screws penetrate the shaft.
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.






| Electrically insulating |
| No |
| Material | Steel (1045) |
| Stainless | No |
| Surface | Black oxide finish |
| With keyway | No |