MÄDLERMÄDLER
Clamping bush MSA bore 25mm
Réf. fabricant 61502500
242.65 $≈ 210.23 €
Le prix en résumé
Vendu par MÄDLER à 210.23 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 270.28 €. Prix relevés le 2026-08-07.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Sur commandedélai 14 j
Coût total livré estimé
| Article | 210.23 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 45.05 € |
| Total livré | 270.28 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Documentation technique
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 360 g |
Autres caractéristiques
| Admissible axial force | 27 kN |
| Inner diameter | 25 mm |
| Length | 37 mm |
| No of pins pcs | 6 |
| Outer diameter | 46 mm |
| Tightening torque fastening screws | 8 Nm |
| Transmissible torque | 340 Nm |
| Design shape | With flange, mechanical |
| Material | Steel |
| Self centering | Yes |
| Surface | Blank |
| Surface pressure | 58 N/mm2 |
| Thread size | M 6 x 12 mm |
| Type |
Description
Material: Steel. Mechanical, all-steel clamping elements, containing no hydraulic pressure medium. Both inner part (1) and outer part (2) have a cylindrical buttress thread with a lengthwise slot. The inner ring (3) connected to the inner part (4) has threaded studs, that create a tensioning effect when tightened.The bushes are designed for very high loads in radial as well as in axial direction. The axial runout does usually not exceed 0,02 mm. If a clamping bush without slot on the outside part is to be welded onto a workpiece, we would ask you to contact us first. Feather key grooves in the shaft do not cause any problems; simply remove the frictional corrosion. Tolerance: Shaft h11 up to k6, Hub H7 up to H11 The values for the maximum transmittable torque and the maximum permissible axial force for the clamping bush at static load are stated in the table above. With dynamic load these values have to be reduced, i.e. divided by the operating factors listed in the adjoining table. Operating factor: See PDF-catalog page. 1) approximate surface pressure between clamping bush and hub.
Alternatives moins chères
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.