MÄDLERMÄDLER
Clamping bush MSD bore 22mm steel
Réf. fabricant 61522200
276.46 $≈ 239.53 €
Le prix en résumé
Vendu par MÄDLER à 239.53 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 305.44 €. Prix relevés le 2026-08-07.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock — 2 unitésdélai 14 j
Coût total livré estimé
| Article | 239.53 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 50.91 € |
| Total livré | 305.44 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Documentation technique
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 190 g |
Autres caractéristiques
| Admissible axial force | 12.3 kN |
| Inner diameter | 22 mm |
| Length | 37 mm |
| No of bolts pcs | 4 |
| Outer diameter | 32 mm |
| Tightening torque fastening screws | 8 Nm |
| Transmissible torque | 135 Nm |
| Design shape | With flange, hydraulic |
| Hub surface pressure | 70 N/mm2 |
| Material | Steel |
| Self centering | Yes |
| Shaft surface pressure | 90 N/mm2 |
| Surface | Blank |
Description
Material: Steel. The MSD clamping bush consists of a double-walled, hardened steel sleeve filled with a special pressure medium, a seal, a piston, a compression flange and fastening screws. When tightening the screws, the sleeves expand evenly against shaft and hub, creating a rigid connection. When the screws are loosened, the bush returns to its initial position and can be easily demounted. Concentricity: about 0,03 – 0,06 mm Tolerance: Shaft h8 – k6 (for Product No. 615 215 00 only h7), Hub H7 Advantages: -fast mounting/demounting -sensitive adjustment of the hub can be carried out during assembly -low fastening torque and few screws allow very simple assembly. -good concentricity -small dimensions allow little ouside diametre of the hub MN = transmittable torque at load of 0. If the screws are fastened with Manz. Fa = transmittable axial force at torque of 0. If the screws are fastened with Manz. Manz = required fastening torque for the screws. The dimensions refer to bushes before assembly. Temperature range: -30° to +85°C.