MÄDLERMÄDLER
Locking assembly COM-A bore 17mm size 17-44 QPQ-coated
Réf. fabricant 61577517
23.48 $≈ 20.34 €
Le prix en résumé
Vendu par MÄDLER à 20.34 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 42.41 €. Prix relevés le 2026-08-07.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock — 2 unitésdélai 14 j
Coût total livré estimé
| Article | 20.34 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 7.07 € |
| Total livré | 42.41 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Documentation technique
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 180 g |
Autres caractéristiques
| Admissible axial force | 26 kN |
| Inner diameter | 17 mm |
| Length | 20 mm |
| Outer diameter | 44 mm |
| Tightening torque fastening screws | 15 Nm |
| Transmissible torque | 220 Nm |
| Bolts no x size | 8 x M6 x 18 |
| Design shape | Cylindrical with several screws |
| Hub surface pressure | 240 N/mm2 |
| Material | Steel |
| Self centering | No |
| Surface | QPQ-coated |
| Type | COM-A QPQ |
Description
Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts – Fastening Torque T – Transmittable Torque F – Transmittable Axial Force P – Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 – 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4.
Alternatives moins chères
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.
Produits similaires
MÄDLEREn stock
Locking assembly COM-A bore 16mm size 16-44 QPQ-coated
20.34 €23.48 $
Voir chez le vendeur ↗MÄDLEREn stock
Locking assembly COM-A bore 22mm size 22-47 QPQ-coated
20.26 €23.38 $
Voir chez le vendeur ↗MÄDLEREn stock
Locking assembly COM-A bore 19mm size 19-47 QPQ-coated
20.87 €24.09 $
Voir chez le vendeur ↗MÄDLEREn stock
Locking assembly COM-A bore 45mm size 45-75 QPQ-coated
31.16 €35.97 $
Voir chez le vendeur ↗