Locking assembly COM-A bore 24mm size 24-50 QPQ-coated

MÄDLERMÄDLER

Locking assembly COM-A bore 24mm size 24-50 QPQ-coated

Name: Locking assembly COM-A bore 24mm size 24-50 QPQ-coated
Brand: MÄDLER
Price: 24.75 USD
Availability: InStock

Réf. fabricant 61577524

24.75 $≈ 21.46 €

Le prix en résumé

Vendu par MÄDLER à 21.46 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 43.75 €. Prix relevés le 2026-08-07.

Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.

En stock — 2 unitésdélai 14 j

Voir chez le vendeur ↗

Coût total livré estimé

Détail du coût total livré
Article	21.46 €
Frais de port	15.00 €
TVA (20 %)	7.29 €
Total livré	43.75 €

Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.

Documentation technique

Caractéristiques (extraites automatiquement)

Mécanique

Poids

210 g

Autres caractéristiques

Admissible axial force	32 kN
Inner diameter	24 mm
Length	20 mm
Outer diameter	50 mm
Tightening torque fastening screws	15 Nm
Transmissible torque	380 Nm
Bolts no x size	8 x M6 x 18
Design shape	Cylindrical with several screws
Hub surface pressure	216 N/mm2
Material	Steel
Self centering	No
Surface	QPQ-coated
Type	COM-A QPQ

Description

Material: Steel, QPQ coated. High corrosion resistance,improved fatigue strength, primarily food safe. Clamping bush for medium high torques; not self-centering. Fit: Shaft h8. Hub H8. Surface roughness hub/shaft Rz max. 12.5 µm. Mounting: Slightly oil the clamping set before mounting, do not use molibdenum disulphide or grease. Tighten the screws evenly and crosswise in several steps. Demounting: Due to the large cone angle, the clamping set releases on its own after the screws have been fully unfastened. There are three larger threads cut into the front ring, which serve to remove this ring. Ts – Fastening Torque T – Transmittable Torque F – Transmittable Axial Force P – Surface Pressure onto Hub QPQ Surface Properties: Very good corrosion resistance, betterthan hard chrome or chem. nickel. Corrosion resistance in the salt spraytest SS CASS in accordance with DIN 50021. Layer thickness of 10 – 25 µmpossible. For medium operational demands we recommend a layer thicknessof 15 µm at a 90 minute treatment. Only very small changes in dimensions(only 5 µm), as the surface modification is achieved through diffusionand not application. Surface hardness same as clamping set material =350 HV. Improved wear resistance, no fretting corrosion, no cold shut.Increased endurance strength, sometimes up to 100% higher. Is completelysafe to use with food as long as there is no contact with any acidicsubstances with a pH-value of = 4.