

Réf. fabricant 63135000N
Vendu par MÄDLER à 175.34 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 228.41 €. Prix relevés le 2026-08-05.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 175.34 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 38.07 € |
| Total livré | 228.41 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 1.3 kg |
| Bore | 25 mm |
| Keyway width | 8 mm |
| Max torque | 290 Nm |
| Outer diameter | 50 mm |
| Total length | 125 mm |
| Material | Steel (12L13) |
| Surface | Blank |
Material: Steel 11SMnPb30K. Max. Operating Angle 35°. Temperature range: -70°C to +160°C. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C. With keyway DIN 6885-1, on both sides. At the end of the keyway, there is a hole in radial direction, through the half joint. This is necessary for the production.
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.





