

Réf. fabricant 63135500
Vendu par MÄDLER à 156.16 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 205.39 €. Prix relevés le 2026-08-05.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 156.16 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 34.23 € |
| Total livré | 205.39 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 1.7 kg |
| Bore | 30 mm |
| Max torque | 440 Nm |
| Outer diameter | 55 mm |
| Total length | 135 mm |
| Material | Steel (12L13) |
| Surface | Blank |
Material: Steel 11SMn30 (1.0715). Max. Operating Angle 35°. Temperature range: -70°C to +160°C. Optionally without or with keyway DIN 6885-1, on both sides. The ball joints RW are simple, sliding-contact bearing elements and can only be used at low speeds. The respective maximum speeds depend on operating angle and load, but should possibly not exceed 500 rpm. The maximum torque values listed in the table are limits, which must also never be exceeded. They may only be used to their full extend with intermittent operation or at low speed and small operating angle. Can be used from -70° to +160°C.
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.





