

Réf. fabricant 64050206
Vendu par MÄDLER à 503.71 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 622.45 €. Prix relevés le 2026-08-05.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 503.71 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 103.74 € |
| Total livré | 622.45 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 1.1 kg |
| Dimensions | 50x20mm |
| Axial clearance | 0.15 mm |
| Ball diameter | 6.35 mm |
| Load rating | 48 kN |
| Turns per circuit | 3 |
| Material | Steel / Plastic |
| Size | 50 x 20 mm |
| Surface | Blank |
| Version | E |
Material: Bearing steel 100Cr6, No. 1.3505. To be combined with MÄDLER® ball screw spindles. The spindle has to be ordered separately. With axial clearance, for running with low friction. Temperature range: -20°C to +80°C (for short time to +110°C). Mounting note: Please refer to the mounting- and operating instruction. The ball screw nuts will be delivered with a plastic tube inside. This tube is a transport protection against loosing the balls and is also a mounting aid. When the tube is hold against the spindle end, the nut can get screwed onto the spindle without loosing balls. Before use, the nut and the spindle have to be lubricated. For grease lubrication, normal roller bearing grease is recommended. The lubricant consumption depends on the condition of use.
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.





