

Réf. fabricant 65437430
Vendu par MÄDLER à 376.56 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 469.87 €. Prix relevés le 2026-08-05.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 376.56 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 78.31 € |
| Total livré | 469.87 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 650 g |
| Load rating | 3 350 N |
| Outer diameter | 49.9 mm |
| Outer diameter mounting surface | 50.5 mm |
| Size | 30 mm |
| Total height | 60 mm |
| Material | Steel |
| Surface | Black oxide finish |
Material: Housing: Steel, black oxide finish. Inside this sleeve, there is a zinc-plated ball cup. Ball cup: Steel, case hardened. Balls: Steel 100Cr6, hardened. Medium duty ball transfer unit for medium high load, springloaded. Orientation: Ball up or horizontal. Shock loads may be higher than the stated load range. At force Fs max the end of spring travel is reached. With drain hole. Conveying speed max. 1.5m/sec. Temperature range -30°C to +100°C. * Bore size. Recommended bore tolerance: H9. Note: Due to unevenness of the running surface, there are often only three rollers carrying the weight. Therefore the chosen load rating should equal at least one third of the load. Max. distance of ball transfer units = edge length of the object divided by 2.5.
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.





