

Réf. fabricant 65493200
Vendu par MÄDLER à 16.40 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 37.68 €. Prix relevés le 2026-08-05.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 16.40 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 6.28 € |
| Total livré | 37.68 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 29 g |
| Ball diameter | 5 mm |
| Center distance ball area to head | 4.8 mm |
| Intake bore h8 | 12 mm |
| Length to flattening | 9 mm |
| Outer diameter | 12 mm |
| Overhang of ball | 1.5 mm |
| Spring load end | 13 N |
| Spring load inital | 6.5 N |
| Spring travel of ball | 5 mm |
| Total length | 35 mm |
| Material | Steel / Stainless steel |
| Surface | Black oxide finish |
| Version | A |
Material: Version A: Free cutting steel, black oxide finish. Ball: Stainless steel, hardened. Spring: Stainless steel. Temperature range -30°C to +50°C. Version B: Free cutting steel, burnished. Ball: Steel, hardened. Spring: Plastic. Temperature range -40°C to +80°C. Note: The side thrust pin is pressed into the bore by at least as far as the measure l3. It serves to position, hold or clamp small workpieces inside fixtures. If the workpiece is machined, additional clamping devices might be required for holding it safely in place. If fixtures are stored please make sure that the plastic spring is not loaded. *statistical average
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.





