Index plunger 817 version CK bolt diameter 4mm stainless steel 1.4305

MÄDLERMÄDLER

Index plunger 817 version CK bolt diameter 4mm stainless steel 1.4305

Name: Index plunger 817 version CK bolt diameter 4mm stainless steel 1.4305
Brand: MÄDLER
Price: 18.97 USD
Availability: InStock

Réf. fabricant 66699714

18.97 $≈ 16.45 €

Le prix en résumé

Vendu par MÄDLER à 16.45 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 37.74 €. Prix relevés le 2026-08-09.

Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.

En stock — 2 unitésdélai 14 j

Voir chez le vendeur ↗

Coût total livré estimé

Détail du coût total livré
Article	16.45 €
Frais de port	15.00 €
TVA (20 %)	6.29 €
Total livré	37.74 €

Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.

Documentation technique

Caractéristiques (extraites automatiquement)

Mécanique

Poids

14.4 g

Autres caractéristiques

Bolt diameter d1 0 02 0 04	4 mm
Bolt overhang	4 mm
Knob diameter	16 mm
Screw in length	16 mm
Spring load end	12 N
Spring load inital	4 N
Total length	35 mm
Wrench size	10 mm
Material	Stainless steel / Plastic
Shape	CK
Surface	Blank
Thread size	M 8×1 mm

Description

Material: Stainless steel 1.4305 (AISI 303), plunger pin nickel-plated. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: – small outer dimensions – most of the release mechanism (version C/CK) is covered – defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: with knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: with knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: with threaded plunger end, for applications where a special knob to customer¿s request is required or where the plunger pin is not shifted manually.