Rubber-metal buffer KP diameter 50mm height 58mm thread M10x28

MÄDLERMÄDLER

Rubber-metal buffer KP diameter 50mm height 58mm thread M10x28

Name: Rubber-metal buffer KP diameter 50mm height 58mm thread M10x28
Brand: MÄDLER
Price: 9.79 USD
Availability: InStock

Réf. fabricant 68504500

9.79 $≈ 8.49 €

Le prix en résumé

Vendu par MÄDLER à 8.49 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 28.19 €. Prix relevés le 2026-08-05.

Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.

En stock — 97 unitésdélai 14 j

Voir chez le vendeur ↗

Coût total livré estimé

Détail du coût total livré
Article	8.49 €
Frais de port	15.00 €
TVA (20 %)	4.70 €
Total livré	28.19 €

Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.

Documentation technique

Caractéristiques (extraites automatiquement)

Mécanique

Poids

127 g

Autres caractéristiques

Height	58 mm
Outer diameter	50 mm
Pressure load	320 N
Spring rate medium	33 N/mm
Thread length	28 mm
Material	Natural rubber / Steel
Surface	Zinc-plated
Thread size	M 10 mm

Description

Material: Metal parts: Steel, zinc-plated. Elastomer: Natural rubber hardness 55° Shore. Rubber-Metal buffers are simple, reasonably priced standard components used for elastic mounting. When shearing load occurs their load-bearing capacity is considerably lower than with pressure load. This has to be considered when horizontal mass forces or belt traction occur. The grade of rubber used has perfect physical properties. Type A: with threaded stud. * Fperm. is the permissible static permanent load, which may be overlaid by a dynamic, alternating load. With shearing load please take care that no tension load in the rubber occurs at all during mounting. To achieve a sufficient fatigue strength provide some compressive pre-stressing. The stated permissible loads are only approximate, guideline values for the static load for "medium" rubber hardness. With particularly high, dynamic, alternating loads or high frequencies, the load figures have to be reduced accordingly. Temperature resistant up to 80°C.