Rubber-metal buffer KP diameter 75mm height 89mm inner thread M12

MÄDLERMÄDLER

Rubber-metal buffer KP diameter 75mm height 89mm inner thread M12

Name: Rubber-metal buffer KP diameter 75mm height 89mm inner thread M12
Brand: MÄDLER
Price: 16.51 USD
Availability: BackOrder

Réf. fabricant 68505501

16.51 $≈ 14.30 €

Le prix en résumé

Vendu par MÄDLER à 14.30 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 35.16 €. Prix relevés le 2026-08-05.

Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.

Sur commandedélai 14 j

Voir chez le vendeur ↗

Coût total livré estimé

Détail du coût total livré
Article	14.30 €
Frais de port	15.00 €
TVA (20 %)	5.86 €
Total livré	35.16 €

Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.

Documentation technique

Caractéristiques (extraites automatiquement)

Mécanique

Poids

341 g

Autres caractéristiques

Height	89 mm
Length of inner thread	12 mm
Outer diameter	75 mm
Pressure load	900 N
Spring rate medium	55 N/mm
Material	Natural rubber / Steel
Surface	Zinc-plated
Thread size	M 12 mm

Description

Material: Metal parts: Steel, zinc-plated. Elastomer: Natural rubber hardness 55° Shore. Rubber-Metal buffers are simple, reasonably priced standard components used for elastic mounting. When shearing load occurs their load-bearing capacity is considerably lower than with pressure load. This has to be considered when horizontal mass forces or belt traction occur. The grade of rubber used has perfect physical properties. Type I: with internal thread. * Fperm. is the permissible static permanent load, which may be overlaid by a dynamic, alternating load. With shearing load please take care that no tension load in the rubber occurs at all during mounting. To achieve a sufficient fatigue strength provide some compressive pre-stressing. The stated permissible loads are only approximate, guideline values for the static load for "medium" rubber hardness. With particularly high, dynamic, alternating loads or high frequencies, the load figures have to be reduced accordingly. Temperature resistant up to 80°C.