MÄDLERMÄDLER
Rubber-metal buffer MGP diameter 50mm height 45mm thread M10x33
Réf. fabricant 68532400
12.08 $≈ 10.47 €
Le prix en résumé
Vendu par MÄDLER à 10.47 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 30.56 €. Prix relevés le 2026-08-05.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Sur commandedélai 14 j
Coût total livré estimé
| Article | 10.47 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 5.09 € |
| Total livré | 30.56 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Documentation technique
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 208 g |
Autres caractéristiques
| Height | 45 mm |
| Outer diameter | 50 mm |
| Pressure load | 1 000 N |
| Shearing load | 400 N |
| Spring rate medium for pressure load | 215 N/mm |
| Spring rate medium for shearing load | 43 N/mm |
| Thread length | 33 mm |
| Material | Natural rubber / Steel |
| Surface | Zinc-plated |
| Thread size | M 10 mm |
Description
Material: Metal parts: Steel, zinc-plated. Elastomer: Natural rubber, 55° Shore hardness. Rubber-Metal buffers are simple, reasonably priced standard components used for elastic mounting. When shearing load occurs their load-bearing capacity is considerably lower than with pressure load. This has to be considered when horizontal mass forces or belt traction occur. The grade of rubber used has perfect physical properties. Temperature resistant up to 80°C. For a linear resilience characteristic the Spring Load C means, for any operating point, the constant relation of load F [N] to jounce travel f [mm]. C = F/f [N/mm]. In the technical data, these constants are stated as CD for pure pressure load and as CS for pure shear load. * F perm. is the permissible static permanent load, which may be overlaid by a dynamic, alternating load. With shearing load please take care that no tension load in the rubber occurs at all during mounting. To achieve a sufficient fatigue strength provide some compressive prestressing. The stated permissible loads are only approximate, guideline values for the static load for "medium" rubber hardness. With particularly high, dynamic, alternating loads or high frequencies, the load figures have to be accordingly reduced.
Alternatives moins chères
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.
MÄDLEREn stock
Rubber-metal buffer MGP diameter 15mm height 10mm thread M4x10
2.34 €2.70 $
Voir chez le vendeur ↗MÄDLEREn stock
Rubber-metal buffer MGP diameter 15mm height 20mm thread M4x13
2.38 €2.75 $
Voir chez le vendeur ↗Produits similaires
MÄDLERSur commande
Rubber-metal buffer MGP diameter 50mm height 40mm thread M10x28
8.60 €9.93 $
Voir chez le vendeur ↗MÄDLERSur commande
Rubber-metal buffer MGP diameter 50mm height 30mm thread M10x28
8.21 €9.48 $
Voir chez le vendeur ↗MÄDLERSur commande
Rubber-metal buffer MGP diameter 50mm height 20mm thread M10x28
7.46 €8.61 $
Voir chez le vendeur ↗MÄDLERSur commande
Rubber-metal buffer MGP diameter 50mm height 50mm thread M10x28
9.82 €11.33 $
Voir chez le vendeur ↗