MÄDLERMÄDLER· Mécanique & transmission
Profile damper TA 40-16 diameter 40mm thread M8
Réf. fabricant 69104000
Réf. fabricant 69104000
Vendu par MÄDLER à 49.03 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 76.84 €. Prix relevés le 2026-08-05.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 49.03 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 12.81 € |
| Total livré | 76.84 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 51 g |
| Energy usage at continuous use per stroke | 82 Nm |
| Energy usage with emergency stop per stroke | 130 Nm |
| Length of damper | 35 mm |
| Max stroke | 16 mm |
| Outer diameter | 40 mm |
| Thread length | 8 mm |
| Material | Co-Polyester elastomer |
| Surface | Blank |
| Thread size | M 8 |
| Type | 40-16 |
Material: Co-Polyester Elastomer. The profile damper TA are maintenance-free, self-contained damping elements. Due to the degressive damping characteristics it provides a very high energy absorption at the beginning of the stroke. The excellent temperature characteristic of the material provides consistent damping performance over a temperature range of -40°C to +90°C. The low installed weight, the economic price and the long operating life of up to 1 million cycles makes this an attractive alternative to hydraulic end position damping, if the moving mass does not need to stop in an exact datum position and it is not necessary to absorb 100% of the incoming energy. The life cycle is up to 20 times longer than for urethene dampers and up to ten times longer than for rubber springs. Environment: Resistant to oil, grease seawater and to microbe or chemical attack. Excellent UV and ozone resistance. Material does not absorb water or swell. Dynamic Force Range: 870 N to 90,000 N. Temperature Range: -40°C to +90°C. Energy Absorption: 58% to 73%. Material Hardness: Shore 55D. Mounting: in any position. Impact Velocity range: up to max. 5 m/s Mounting Bolt Torque: M3: 1 Nm. M4: 2 Nm. M5: 4 Nm. M6: 6 Nm. M8: 20 Nm. M12: 50 Nm. M16: 120 Nm. On request: special strokes, characteristics, spring rates, sizes and materials. Download Energy Stroke Characteristics 1.6 MB 1) Max. energy capacity per cycle for continuous use. 2) For a single cycle, e.g. an emergency stop.
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.