MÄDLERMÄDLER· Mécanique & transmission

Profile damper TS 64-34 diameter 64mm thread M16

Name: Profile damper TS 64-34 diameter 64mm thread M16
Brand: MÄDLER
Price: 145.20 USD
Availability: BackOrder

Réf. fabricant 69116400

145.20 $≈ 125.80 €

Le prix en résumé

Vendu par MÄDLER à 125.80 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 168.96 €. Prix relevés le 2026-08-05.

Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.

Sur commandedélai 14 j

Voir chez le vendeur ↗

Coût total livré estimé

Détail du coût total livré
Article	125.80 €
Frais de port	15.00 €
TVA (20 %)	28.16 €
Total livré	168.96 €

Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.

Documentation technique

Caractéristiques (extraites automatiquement)

Mécanique

Poids

232 g

Autres caractéristiques

Energy usage at continuous use per stroke	208 Nm
Energy usage with emergency stop per stroke	254 Nm
Length of damper	66 mm
Max stroke	34 mm
Outer diameter	64 mm
Thread length	16 mm
Material	Co-Polyester elastomer
Surface	Blank
Thread size	M 16
Type	64-34

Description

Material: Co-Polyester Elastomer. The profile dampers TS are a maintenance-free, self-contained damping elements. Due to the almost linear damping characteristics it provides very smooth energy absorption along with minimum reaction loads on the machine. The excellent temperature characteristic of the material provides consistent damping performance over a temperature range of -40°C to +90°C. The low installed weight, the economic price and the long operating life of up to 1 million cycles makes this an attractive alternative to hydraulic end position damping, if the moving mass does not need to stop in an exact datum position and it is not necessary to absorb 100% of the incoming energy. The life cycle is up to 20 times longer than for urethene dampers and up to ten times longer than for rubber springs. Environment: Resistant to oil, grease seawater and to microbe or chemical attack. Excellent UV and ozone resistance. Material does not absorb water or swell. Dynamic Force Range: 533 N to 23,500 N. Temperature Range: -40°C to +90°C. Energy Absorption: 35% to 64%. Material Hardness: Shore 40D. Mounting: in any position. Impact Velocity range: up to max. 5 m/s. Mounting Bolt Torque: M4: 2 Nm. M5: 4 Nm. M6: 6 Nm. M12: 50 Nm. M16: 120 Nm. On request: special strokes, characteristics, spring rates, sizes and materials. Download Energy-Stroke Characteristics 1.5 MB 1) Max. energy capacity per cycle for continuous use. 2) For a single cycle, e.g. an emergency stop.