MÄDLERMÄDLER· Mécanique & transmission

Profile damper TR 29-17 diameter 28mm thread M5

Name: Profile damper TR 29-17 diameter 28mm thread M5
Brand: MÄDLER
Price: 17.21 USD
Availability: BackOrder

Réf. fabricant 69122900

17.21 $≈ 14.91 €

Le prix en résumé

Vendu par MÄDLER à 14.91 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 35.89 €. Prix relevés le 2026-08-05.

Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.

Sur commandedélai 14 j

Voir chez le vendeur ↗

Coût total livré estimé

Détail du coût total livré
Article	14.91 €
Frais de port	15.00 €
TVA (20 %)	5.98 €
Total livré	35.89 €

Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.

Documentation technique

Caractéristiques (extraites automatiquement)

Mécanique

Poids

10 g

Autres caractéristiques

Energy usage at continuous use per stroke	1.2 Nm
Energy usage with emergency stop per stroke	1.8 Nm
Length of damper	25 mm
Max stroke	17 mm
Outer diameter	29 mm
Thread length	5 mm
Width	13 mm
Material	Co-Polyester elastomer
Surface	Blank
Thread size	M 5
Type	29-17

Description

Material: Co-Polyester Elastomer. The profile damper TR is a maintenance-free, self-contained damping element. The radial deformation provides a very soft deceleration with a progressive energy absorption towards the end of the stroke. The excellent temperature characteristic of the material provides consistent damping performance over a temperature range of -40°C to +90°C. The low installed weight, the economic price and the long operating life of up to 1 million cycles makes this an attractive alternative to hydraulic end position damping, if the moving mass does not need to stop in an exact datum position and it is not necessary to absorb 100% of the incoming energy. The life cycle is up to 20 times longer than for urethene dampers and up to ten times longer than for rubber springs. Environment: Resistant to oil, grease seawater and to microbe or chemical attack. Excellent UV and ozone resistance. Material does not absorb water or swell. Dynamic Force Range: 218 N to 7,500 N. Temperature Range: -40°C to +90°C. Energy Absorption: 25% to 45%. Material Hardness: Shore 40D. Mounting: in any position. Impact Velocity range: up to max. 5 m/s. Mounting Bolt Torque: M5: 4 Nm. M6: 6 Nm. M8: 20 Nm. On request: special strokes, characteristics, spring rates, sizes and materials. Download Energy-Stroke Characteristics 0.7 MB 1) Max. energy capacity per cycle for continuous use. 2) For a single cycle, e.g. an emergency stop.