MÄDLERMÄDLER
Integrated freewheel BSEU40-30 European type inner diameter 30mm outer diameter 118mm width 55mm with keyway at inner ring
Réf. fabricant BSEU40-30
615.41 $≈ 532.64 €
Le prix en résumé
Vendu par MÄDLER à 532.64 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 657.17 €. Prix relevés le 2026-08-05.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Sur commandedélai 14 j
Coût total livré estimé
| Article | 532.64 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 109.53 € |
| Total livré | 657.17 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Documentation technique
Caractéristiques (extraites automatiquement)
Mécanique
| Couple | 14 683,7 kg·cm |
| Poids | 3.56 kg |
Autres caractéristiques
| B | 15 mm |
| B1 | 15 mm |
| C1 | 55 mm |
| D | 118 mm |
| D h7 | 30 mm |
| D1 | 60 mm |
| G | 40 mm |
| H | 110 mm |
| L1 | 35 mm |
| L2 | 8 mm |
| M | 1.5 mm |
| Max overrunning inner race | 450 |
| T2 | 3.3 mm |
Description
he premium quality integrated sprag freewheels of the BSEU series were developed as classic backstops for a wide variety of conveyor belt sizes, bucket elevators and inclined conveyors. These European-style backstops are used in low-speed applications. Keyway: according to DIN 6885-1. Mounting: Recommended shaft tolerance h7 or h8. The direction of rotation of the inner ring must correspond to the direction of rotation of the application. The direction of rotation is indicated by a marking arrow on the inner ring. Lubrication: Lubricated for life with low temperature grease. Temperature range: -40°C bis + 50°C. The temperature range applies to the specified max. overrunning speed. Outside this temperature range, the specified speed can no longer be guaranteed. Very low speeds allow a higher temperature. In this case, please consult us. Mounting: During assembly, the freewheel must always be mounted on the shaft with a keyway provided by the customer. Then fasten the freewheel with an end washer. Never use a tapered / wedge-shaped keyway. When mounting the freewheel onto the shaft, only apply pressure to the surface of the inner ring with a soft rubber mallet and do not subject the freewheel to unnecessary shocks. Use the frame or a pin to eliminate outer race rotation. Note: The load on the torque arm must be perpendicular to the direction of the shaft. Otherwise the internal parts of the freewheel may jam and cause damage. A clearance of 0.5 mm must be set between the torque arm and the customer‘s frame (stop for the torque arm) or the slotted hole in the torque arm and the pin. A rigidly mounted torque arm could damage the freewheel. Other versions on request.
Alternatives moins chères
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.
MÄDLERSur commande
Ball bearing freewheel BB30 inner diameter 30mm outer diameter 62mm width 16mm without keyway
72.15 €83.27 $
Voir chez le vendeur ↗
MÄDLERSur commande
Ball bearing freewheel BB17-1K-K inner diameter 17mm outer diameter 40mm width 12mm with keyway at the inner ring
79.55 €91.82 $
Voir chez le vendeur ↗Produits similaires
MÄDLERSur commande
Integrated freewheel BSEU40-35 European type inner diameter 35mm outer diameter 118mm width 55mm with keyway at inner ring
533.02 €615.21 $
Voir chez le vendeur ↗MÄDLERSur commande
Integrated freewheel BSEU40-40 European type inner diameter 40mm outer diameter 118mm width 55mm with keyway at inner ring
532.82 €614.98 $
Voir chez le vendeur ↗MÄDLERSur commande
Integrated freewheel BSEU40-20 European type inner diameter 20mm outer diameter 118mm width 55mm with keyway at inner ring
533.36 €615.60 $
Voir chez le vendeur ↗MÄDLERSur commande
Integrated freewheel BSEU70-45 European type inner diameter 45mm outer diameter 165mm width 59mm with keyway at inner ring
785.40 €906.51 $
Voir chez le vendeur ↗