MÄDLERMÄDLER
Internal freewheels TFS-30 inner diameter 30mm outer diameter 72mm width 27mm with keyway at inner ring and radial keyways at outer ring
Réf. fabricant TFS30
277.88 $≈ 240.90 €
Le prix en résumé
Vendu par MÄDLER à 240.90 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 307.08 €. Prix relevés le 2026-08-05.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Sur commandedélai 14 j
Coût total livré estimé
| Article | 240.90 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 51.18 € |
| Total livré | 307.08 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Documentation technique
Caractéristiques (extraites automatiquement)
Mécanique
| Couple | 2 039,4 kg·cm |
| Poids | 530 g |
Autres caractéristiques
| B | 27 mm |
| B1 | 10 mm |
| D | 72 mm |
| D h7 | 30 mm |
| D1 | 40 mm |
| Drag torque | 0.21 Nm |
| E | 1.8 mm |
| Max overrunning inner race | 1 600 |
| Max overrunning outer race | 800 |
| R1 | 1 mm |
| T | 2 mm |
| T1 | 2.5 mm |
Description
These sprag freewheels without own bearing support in premium quality can be used as indexing freewheels, backstops or overrunning clutches. They allow a compact design and are installed in housings provided by the customer. The user must ensure proper bearings, lubrication and sealing during installation. Radial forces are not permitted. The nominal dimensions d x D correspond to the dimensions of ball bearing series 63, except for TFS 12. With keyway on the inner ring and two radial, face-side grooves on the outer ring on both sides. Keyway: The keyway is up to diameter d=12mm according to DIN 6885-1. Above that according to DIN 6885-3. Mounting: For the bearing and the freewheel, the same installation tolerances must be provided. Recommended housing tolerance H7. For the shaft h7. If the tolerance of the housing inner diameter for the freewheel TFS is K6, no feather keys are required on the end face grooves of the freewheel. During installation, care must be taken to ensure the correct direction of rotation. The direction of rotation is indicated by a marking arrow on the freewheel. Lubrication: Oil lubrication, see Additional Documents. Oils or other lubricants containing EP additives must not be used. Temperature range: approx. -10°C to + 50°C. Other versions on request.
Alternatives moins chères
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.
MÄDLERSur commande
Ball bearing freewheel BB20 inner diameter 20mm outer diameter 47mm width 14mm without keyway
63.33 €73.05 $
Voir chez le vendeur ↗MÄDLERSur commande
Ball bearing freewheel BB30 inner diameter 30mm outer diameter 62mm width 16mm without keyway
72.19 €83.27 $
Voir chez le vendeur ↗
Produits similaires
MÄDLERSur commande
Internal freewheels TFS-35 inner diameter 35mm outer diameter 80mm width 31mm with keyway at inner ring and radial keyways at outer ring
290.44 €335.02 $
Voir chez le vendeur ↗MÄDLERSur commande
Internal freewheels TFS-20 inner diameter 20mm outer diameter 52mm width 21mm with keyway at inner ring and radial keyways at outer ring
172.38 €198.84 $
Voir chez le vendeur ↗MÄDLERSur commande
Internal freewheels TFS-60 inner diameter 60mm outer diameter 130mm width 46mm with keyway at inner ring and radial keyways at outer ring
762.08 €879.06 $
Voir chez le vendeur ↗
MÄDLERSur commande
Internal freewheels TSS-30 inner diameter 30mm outer diameter 62mm width 16mm with keyway at inner ring
184.50 €212.82 $
Voir chez le vendeur ↗