MÄDLERMÄDLER· Sprockets, Chains, Accessories
Chain tensioner SPANN-BOY® TS 05 B-3 stainless steel
Manufacturer part no. 14040930
$213.50≈ 185.41 €
On backorderlead time 14 d
Estimated landed cost
| Item | €185.41 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €40.08 |
| Total delivered | €240.49 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 480 g |
Other characteristics
| Distance to middle of chain sliding surface for | 7.4 mm |
| Number of strands | 3 |
| Total width of sliding element | 20 mm |
| Din iso no | 05 B-3 |
| Material | Plastic (PE-UHMW) / Stainless steel |
| Pitch | 8 x 3mm |
| Surface | Blank |
| Tensioning force | 33-190 N |
Description
Material: Housing from stainless steel. Chain rider from ultra-high-molecular polyethylene PE-UHMW. These very low, ready-to-install tensioners enable noise reduction and wear reduction at chain drives. • Needed space below chain only 40mm. • With two springs of different force, which can get activated separately or together. So it is possible to adjust three different tensioning forces. • Usable travel about 40mm. • Interchangeable with similar parts of other suppliers. Temperature range: -20°C to +60°C (short time up to +80°C).
Similar products
MÄDLERIn stock
Chain wheel, 8 teeth made of cast iron 20 DIN 766 outer diameter 170mm, for diameter 10 mm
€160.06$184.31
View at seller ↗MÄDLERIn stock
Chain wheel, 5 teeth made of cast iron 20 DIN 766 outer diameter 115mm, for diameter 10 mm
€105.11$121.03
View at seller ↗MÄDLERIn stock
Chain wheel, 24 teeth made of cast iron 20 DIN 766 outer diameter 390mm, for diameter 8 mm
€385.42$443.81
View at seller ↗MÄDLERIn stock
Chain wheel , 18 teeth made of cast iron 20 DIN 766 outer diameter 305mm, for diameter 8 mm
€347.34$399.96
View at seller ↗