MÄDLERMÄDLER· Splined Shafts and Toothed Shafts and Hubs
clamp collar single split aluminium with profile DIN ISO 14 KN 36×42
Manufacturer part no. 64863200
$70.93≈ 61.60 €
In stock — 5 unitslead time 14 d
Estimated landed cost
| Item | €61.60 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €15.32 |
| Total delivered | €91.92 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 155 g |
Other characteristics
| Inner diameter | 36 mm |
| Length | 19 mm |
| Outer diameter | 73 mm |
| Version | 2 |
| Wrench size of nut | 13 mm |
| Material | Aluminum |
| Profile type | KN 36 x 42 mm |
| Screw din 912 | M 8 x 25 |
| Surface | Blank |
Description
Material: Aluminium. Screw stainless steel A2-70. Single-split clamp collars, as end-stops on spline shafts. These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust. Version 1: The thread of the screw DIN 912 is covered with a layer of nylon. Version 2: with additional nut, for adjusting the inner diameter and as lock nut. Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C.
Similar products
MÄDLERIn stock
Clamp collar for splined hub DIN ISO 14 KN 46×54 diameter 100mm stainless steel 1.4305
€340.59$392.19
View at seller ↗MÄDLERIn stock
Clamp collar for splined hub DIN ISO 14 KN 42×48 diameter 95mm stainless steel 1.4305
€265.92$306.21
View at seller ↗MÄDLERIn stock
Clamp collar for splined hub DIN ISO 14 KN 28×34 diameter 78mm stainless steel 1.4305
€200.11$230.43
View at seller ↗MÄDLERIn stock
Clamp collar for splined hub DIN ISO 14 KN 32×38 diameter 82mm stainless steel 1.4305
€208.85$240.49
View at seller ↗