MÄDLERMÄDLER· Splined Shafts and Toothed Shafts and Hubs
Clamp collar single split steel C45 with profile DIN ISO 14 KN 26×32
Manufacturer part no. 64867700
$63.54≈ 55.18 €
In stock — 1 unitslead time 14 d
Estimated landed cost
| Item | €55.18 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €14.04 |
| Total delivered | €84.22 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 180 g |
Other characteristics
| Inner diameter | 26 mm |
| Length | 15 mm |
| Outer diameter | 54 mm |
| Version | 2 |
| Wrench size of nut | 10 mm |
| Material | Steel (1045) |
| Profile type | KN 26 x 32 mm |
| Screw din 912 | M 6 x 18 |
| Surface | Blank |
Description
Material: Steel C45, screw strength 12.9, zinc-plated. Single-split clamp collars, as end-stops on spline shafts. These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust. Version 1: The thread of the screw DIN 912 is covered with a layer of nylon. Version 2: with additional nut, for adjusting the inner diameter and as lock nut. Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C.
Similar products
MÄDLERIn stock
Clamp collar for splined hub DIN ISO 14 KN 46×54 diameter 100mm stainless steel 1.4305
€340.59$392.19
View at seller ↗MÄDLERIn stock
Clamp collar for splined hub DIN ISO 14 KN 42×48 diameter 95mm stainless steel 1.4305
€265.92$306.21
View at seller ↗MÄDLERIn stock
Clamp collar for splined hub DIN ISO 14 KN 28×34 diameter 78mm stainless steel 1.4305
€200.11$230.43
View at seller ↗MÄDLERIn stock
Clamp collar for splined hub DIN ISO 14 KN 32×38 diameter 82mm stainless steel 1.4305
€208.85$240.49
View at seller ↗